Clausing Manual Surface Grinder: 20" Table Length, 10" Table Width, 3 Phase, 3,450 RPM, 230 & 460V-3 hp, 1-1/4" Arbor Hole Dia, 8" Wheel Dia, 0.748" Wheel Width
MFR Code: CSG1020ASDIII
Brand: Clausing
| Arbor Hole Diameter (Decimal Inch) | : | 1.2500 |
| Arbor Hole Diameter | : | 31.75 mm; 1.25 in |
| Arbor Hole Diameter (Inch) | : | 1-1/4 |
| Arbor Hole Diameter (mm) | : | 31.75 |
| Operation Type | : | Automatic |
| Machine Type | : | Floor |
| Spindle Speed | : | 3450 |
| Table Length | : | 20 in; 508 mm |
| Wheel Diameter (Inch) | : | 8 |
| Table Width | : | 254 mm; 10 in |
| Wheel Diameter | : | 8 in; 203.2 mm |
| Wheel Width (Decimal Inch) | : | 0.7480 |
| Wheel Width | : | 0.748 in; 19 mm |
| Table Speed | : | 196.8500 to 984.2520 in/min; 5.00 to 25.00 m/min |
| Phase | : | Three |
| Maximum Cross Grinding Width (Decimal Inch) | : | 11.0000 |
| Maximum Cross Grinding Width (Inch) | : | 11 |
| Maximum Cross Grinding Width (mm) | : | 279.40 |
| Hydraulic Motor Horsepower (HP) | : | 2.00 |
| AC Motor Horsepower | : | 3 |
| Maximum Automatic Crossfeed Transverse Travel | : | 10.625 in; 269.88 mm |
| Maximum Cross Grinding Width | : | 279.4 mm; 11 in |
| Maximum Spindle Centerline To Table Distance | : | 285 mm; 11.2205 in |
| Maximum Spindle Centerline to Table Distance (mm) | : | 285.00 |
| Maximum Longitudinal Table Travel | : | 620 mm; 24.4094 in; 580 mm; 22.8347 in |
| Maximum Longitudinal Grinding Length | : | 520 mm; 20.4724 in |
| Feed Per Graduation Of Handwheel | : | 0.0008 in |
| Maximum Manual Crossfeed Transverse Travel | : | 11.81102 in; 300 mm |
| UNSPSC Code | : | 23241402 |
| Feed Per Revolution Of Handwheel | : | 0.1969 in |
| Feed Rate Per Graduation Of Handwheel | : | 0.02 mm |
| Feed Rate Per Revolution Of Handwheel | : | 5 mm |
| Voltage | : | 230/460 V |
| Overall Length | : | 2400 mm; 94.4882 in |
| Vertical Downfeed Handwheel Per Graduation | : | 0.0005 in |
| Vertical Downfeed Handwheel Per Revolution | : | 0.2 in |
| Vertical Downfeed Rapid Travel | : | 6 |
| Max. Longitudinal Grinding Length (Decimal Inch) | : | 20.4724 |
| Vertical Downfeed Slow Travel | : | 0.2362 |
| Vertical Downfeed Step Feed | : | 0.00004 in; 0.001 mm |
| Max. Spindle Center to Table Dist. (Decimal Inch) | : | 11.2205 |
| Max. Hydraulic Long. Table Travel (Decimal Inch) | : | 22.8347 |
| Max. Manual Cross Transverse Travel (Decimal Inch) | : | 11.811020 |
| Feed Per Revolution of Handwheel (Decimal Inch) | : | 0.1969 |
| Feed Rate Per Revolution of Handwheel (mm) | : | 5.00 |
| Feed Per Graduation of Handwheel (Decimal Inch) | : | 0.0008 |
| Feed Rate Per Graduation of Handwheel (mm) | : | 0.02 |
| Vertical Down Handwheel Per Rev. (Decimal Inch) | : | 0.2000 |
| Vertical Downfeed Handwheel Per Revolution (mm) | : | 0.20 |
| Vertical Down Handwheel Per Grad. (Decimal Inch) | : | 0.0005 |