| Arbor Hole Diameter (Decimal Inch) | 5.0000 |
| Arbor Hole Diameter | 5 in; 127 mm |
| Arbor Hole Diameter (Inch) | 5 |
| Arbor Hole Diameter (mm) | 127.00 |
| Operation Type | Automatic |
| Machine Type | Floor |
| Spindle Speed | 1750 |
| Table Length | 1016 mm; 40 in |
| Wheel Diameter (Inch) | 14 |
| Table Width | 16 in; 406.4 mm |
| Wheel Diameter | 14 in; 355.6 mm |
| Wheel Width (Decimal Inch) | 2.0000 |
| Wheel Width (Inch) | 2 |
| Wheel Width | 2 in; 50.8 mm |
| Table Speed | 196.8500 to 984.2520 in/min; 5.00 to 25.00 m/min |
| Phase | Three |
| Maximum Cross Grinding Width (Decimal Inch) | 16.1417 |
| Maximum Cross Grinding Width (mm) | 410.00 |
| Maximum Longitudinal Grinding Length (Inch) | 40 |
| Hydraulic Motor Horsepower (HP) | 3.00 |
| AC Motor Horsepower | 7.5 |
| Maximum Manual Crossfeed Transverse Travel (Inch) | 18 |
| Maximum Automatic Crossfeed Transverse Travel | 17 in; 431.8 mm |
| Maximum Cross Grinding Width | 410 mm; 16.1417 in |
| Maximum Spindle Centerline To Table Distance | 24.8032 in; 630 mm |
| Maximum Spindle Centerline to Table Distance (mm) | 630.00 |
| Maximum Longitudinal Table Travel | 41.7323 in; 43.3071 in; 1100 mm; 1060 mm |
| Maximum Longitudinal Grinding Length | 1016 mm; 40 in |
| Feed Per Graduation Of Handwheel | 0.0008 in |
| Maximum Manual Crossfeed Transverse Travel | 18 in; 457.2 mm |
| UNSPSC Code | 23241402 |
| Feed Per Revolution Of Handwheel | 0.1969 in |
| Feed Rate Per Graduation Of Handwheel | 0.02 mm |
| Feed Rate Per Revolution Of Handwheel | 5 mm |
| Overall Length (Inch) | 158 |
| Voltage | 230/460 V |
| Overall Length | 158 in; 4013.2 mm |
| Vertical Downfeed Handwheel Per Graduation | 0.0005 in |
| Vertical Downfeed Handwheel Per Revolution | 0.2 in |
| Vertical Downfeed Rapid Travel | 6 |
| Max. Longitudinal Grinding Length (Decimal Inch) | 40.0000 |
| Vertical Downfeed Slow Travel | 0.2362 |
| Vertical Downfeed Step Feed | 0.00004 in; 0.001 mm |
| Max. Spindle Center to Table Dist. (Decimal Inch) | 24.8032 |
| Max. Hydraulic Long. Table Travel (Decimal Inch) | 41.7323 |
| Max. Manual Cross Transverse Travel (Decimal Inch) | 18.000000 |
| Feed Per Revolution of Handwheel (Decimal Inch) | 0.1969 |
| Feed Rate Per Revolution of Handwheel (mm) | 5.00 |
| Feed Per Graduation of Handwheel (Decimal Inch) | 0.0008 |
| Feed Rate Per Graduation of Handwheel (mm) | 0.02 |
| Vertical Down Handwheel Per Rev. (Decimal Inch) | 0.2000 |
| Vertical Downfeed Handwheel Per Revolution (mm) | 0.20 |
| Vertical Down Handwheel Per Grad. (Decimal Inch) | 0.0005 |
This is your item. Ready to proceed?
Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.