PROXXON 24400 24400 PROX24400

<p> <strong> For machining steel, brass, aluminum and plastic. For face and flat turning, taper turning tapping. For face and straight turning, taper turning and tapping. With a wide range of system accessories, you can drill, mill and groove at the same time. <br /> </strong></p> <p> <p> <strong> Machine bed: </strong> High quality cross with wide leg, prismatic slides anchored cast iron. For vibration-free operation even at high loads. With flange and threaded holes at the back for fastening the drill and mill head PF 400. Finished work material. </p> <p> <strong> Mirror: </strong> Made of die-cast aluminum. Oversized main spindle with two adjustable tapered roller bearings and MK 3 bore on chuck side. Spindle bore 20.5 mm. Runout 1/100 mm without mirror. Rotary switch (optionally 0.07 and 0.14 mm / turn) to lock the automatic feed. Trapezoid toothed push and feed spindle (12 x 1.5 mm) </p> <p> <strong> Tailstock Head: </strong> Made of die-cast aluminum. The head Ø 24mm can be rolled up to a distance of 40mm. Scale in mm. With live-center MK 2 and chuck with 10 mm threaded outer (B 12-hole / MK 2). </p> <p> <strong> Support: </strong> Bearing carrier made of die-cast zinc. 85 mm) and top slide (adjustment range 52 mm). Top slide can be rotated for taper turning (graded increments up to 45 ° are available.) With multiple tool posts and two tool post elements for quick change-over and easy height adjustment. For 10 x 10 mm turning tools. </p> <p> <strong> Drive </strong>: Powerful capacitor motor for two revolutions and additional three-stage belt drive. </p> <p> Spindle in step 1 speeds : 80 - 330 - 1,400 rpm. </p> <p> For stage 2: 160 - 660 and 2,800 rpm. </p> <p> <strong> Lathe chuck: </strong> DIN 6386 High quality 3-jaw chuck for Class 1 (concentricity tolerance 0.04mm) compliant. Capacity over reverse working mirrors 3 - 100 mm. Chuck housing with safety shut-off is included. </p> <p> <strong> Handwheels: </strong> Made of aluminum, the scale ring can be set to 0. </p> <p> For cross slide and top slide: 1 division = 0.025 mm. 1 revolution = 1.5 mm. </p> <p> For tailstock and thrust spindle: 1 step line = 0.05 mm. 1 speed = 1.5 mm </p> <p> <strong> Support quick adjustment: </strong> Through the large handwheel connected to the bed with gear racks. </p> <p> <strong> Threading cutting device: < / strong> For left and right thread: with interchangeable gears for 19 different metric pitches: 0.2 - 0.25 - 0.3 - 0.4 -0.45 - 0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1 - 1.25 - 1.5 - 1.75 - 2 - 2.5 - 3mm Also for inch gears between 10 - 48 TPI. </p> Clamping Diameter: Center distance: 400 mm Travel over bed: 85 mm Saddle travel: 116 mm MT3 spindle 20.5 hub diameter Pen holder: 8x8 mm <br / > Power: 500 W <br /> Operating voltage: 220-240V <br /> Dimensions: 530 x 250 x 150 mm <br /> Speed: Motor with forward-reverse switch 1: 80-300-1400 rpm 2: 160-660-2.800 rpm <br /> Weight: 45 kg <br /> Screw pitches: 0.2-0.25-0.35-0.4-0.45-0.5-0.6 -0.7-0.75-0.8-0.9-1.0-1.25-1.5-1.75-2.0-2.5-3.0 mm 19 steps <br / > <br \> Package Content: <ul> <li> MK2 Rotary tailstock </li> <li> 3-jaw chuck </li> <li> 10mm capacity tailstock chuck </li> <li> B12 taper </ li > </ul>